beautypg.com

Dive numbering shown during dive planning, Memory mode – SUUNTO D4i User Manual

Page 89

background image

NOTE

The DIVE PLANNING mode is disabled in FREE mode and in
Error mode (see Section 5.6. Error conditions).

Higher Altitude and conservative Personal Adjustment settings will shorten the no-
decompression time limits. These limits at different Altitude and Personal Adjustment
setting selections are explained in Section 5.9.4. Diving at altitude and in Section 5.9.5.
Personal adjustments
.

7.5.1. Dive numbering shown during dive planning
Dives belong to the same repetitive dive series if the instrument was still counting
down the no-fly time at the beginning of the dive.
The surface interval must be at least five (5) minutes for a dive to be considered a
repetitive dive. Otherwise, it is considered a continuation of the same dive. The dive
number will not change and the dive time will continue where it left off. (Refer also to
Section 7.2. Dive numbering ).

7.6. MEMORY mode
The memory options in the MEMORY mode include dive logbook (MEM Logbook)
and dive history (MEM History). They are accessed from the DIVE mode and you can
toggle between them by using the UP/DOWN buttons.
The dive entry time and date is registered in the Logbook memory. Always check before
diving that the time and date are correctly set, especially after travelling between dif-
ferent time zones.

90