SUUNTO D4i - Manual (Page 50)

5.8.2. Setting the personal/altitude adjustments
The current Altitude and Personal Adjustment settings are displayed in the startup
screen when entering the DIVE mode. If the mode does not match the altitude or
personal conditions (refer to Section 5.9.4. Diving at altitude and Section 5.9.5. Per-
sonal adjustments), it is imperative that you enter the correct selection before diving.
Use Altitude Adjustment to select the correct altitude and use Personal Adjustment to
add an extra level of conservatism.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
5.8.3. Setting the tank pressure pairing
In the Tank Pressure Pairing setting mode, the wireless transmission can be set “ON”
or “OFF” depending on whether the wireless pressure transmitter is used or not. When
the wireless transmission is set “OFF”, no cylinder pressure-related data is shown,
nor data reception made. The Code setting allows you to verify the selected transmitter
code and to clear the stored transmitter code. Clearing the code enables re-pairing
with the transmitter, which can be necessary if a new transmitter or used, or if several
divers are using the same transmitter code.
51