SUUNTO Core - Manual (Page 31)

Log height difference: shows the measured altitude difference between a log
starting point and a log finishing point with the following icons:
In the additional views:
is displayed when your altitude is above the starting point.
is displayed when your altitude is the same as at the starting point.
is displayed when your altitude is below the starting point.
is displayed when you view how much you have ascended from the log
start.
is displayed when you view how much you have descended from the log
start.
Altitude points are recorded according to the recording interval you have
chosen (see Section 9.3 Choosing recording interval on page 46).
To change the recording rate:
1. In MENU , select MEMORY .
2. Select REC INTERVAL .
3. Change the recording rate with [+] and [- Light].
NOTE: An estimation of how much time you can record is shown in the lower
part of the display when you browse between the recording rates. The actual
recording durations may vary slightly depending on your activity during the
recording period.
You can access your history of recorded logs, including log details, from
LOGBOOK in MENU (see Section 9.2 Viewing and locking logs on page 44).
31
en