SUUNTO Core - Manual (Page 20)

6.2 Using stopwatch
The stopwatch measures time. Its resolution is 0.1 seconds.
To use the stopwatch:
1. In the TIME mode, select the stopwatch view.
2. Start, stop and restart the stopwatch with [Start Stop].
3. Keep [+] pressed to reset the stopwatch.
Possible real life situation: Timing the 100m dash
Your friend is training for a running competition, and needs to know how long it
takes him to run the 100 m dash. You start the stopwatch the instant he breaks
from the blocks. You stop the stopwatch the instant he crosses the finish line. The
result: 11.3 seconds. Not bad!
6.3 Using countdown timer
In COUNTDOWN you can set the countdown timer to count down from a preset
time to zero. It sounds an alarm when zero is reached. The default is 5 minutes.
To change the default countdown time:
1. In MENU , select TIME-DATE .
2. Select COUNTDOWN .
3. Set the timer minutes and seconds (maximum 99 minutes and 59
seconds).
4. Accept with [Mode].
To start counting down:
1. In TIME mode, select the countdown timer view.
2. Start, stop and restart with [Start Stop].
3. Keep [+] pressed to reset the timer.
20