SUUNTO Core - Manual (Page 11)

20
Menu
In MENU you can change values, change the general settings and units, or view
logs stored in the logbook. To enter MENU , keep the middle right [Mode] button
pressed while in the TIME , ALTI & BARO or COMPASS mode. The segments in the
outer part of the display indicate your transition time. Exit MENU by pressing
the upper left [Start Stop] button. Whenever an exit option is available in MENU ,
this is indicated with an "X" on the screen next to the [Start Stop] button. Get
familiar with entering and exiting
MENU !
Backlight
You can activate the backlight in any mode by pressing the lower right [- Light]
button. The backlight turns off automatically after 5 seconds. If you want to
see the backlight when you are in
MENU , you need to activate it in the TIME ,
ALTI & BARO or COMPASS mode before entering MENU . The backlight will return
to normal when you return to a mode.
11
en