Studiologic Numa Piano - Manual (Page 12)

NUMA Piano by Studiologic® 12
Eff ects
In Split or Layer mode you can choose if an eff ect is be
applied to just one or both sounds. Press and hold Function
while selecting the appropriate
Assign button at the same
time. The display will show the following options from which
you make a selection, using Value +/-:
Display / Option Eff ect applies to
U-L (Upper/Lower) both split zones / layer
U (Upper) upper split zone / layer 1
L (Lower) lower split zone / layer 2
Press Function again to keep the adjustment and quit the
eff ects assign mode.
To select a Modulation or Reverb eff ect, step through the
algorithms by tapping the corresponding Select button. The
selected eff ect is indicated by LED. If no LED is lit up, no eff ect
is active. Both eff ect machines can be used independantly at
the same time.
Use the Amount or Mix knob to adjust the intensity or the
eff ect mix.
Eff ect assign for
Splits / Layer
Eff ect selection
Tip: This function is very useful if you would like to play in split mode an
Organ sound with Rotary eff ect at the upper zone and a Bass at the lower
split zone, which obviously should not have this eff ect. The assignment
can be individually adjusted for both eff ect machines. Independent of the
actual status of the eff ect machines (selected eff ect or off ), adjustments
can be made.
The Free wheel can either send the modulation data defi ned
by the MIDI standard (Vibrato) or control a second parameter
of the internal processed modulation eff ect, namely the
modulation speed.
To access the settings press Function &
Free Wheel . The
display shows both options Modulation and Eff ect between
which you can choose using Value +/-. To adjust the modula-
tion speed with the Free wheel, choose Eff .
Press Function again to store the adjustment and quit the
free wheel mode.
Free Wheel
Function
• in combination with Eff ekt-
Assign
Amount / Mix
• Intensity of Modulation
• Reverb mix (dry/wet)
Select - Assign
• Eff ect selection
• Eff ect assigns
Free
• Modulation speed
• Vibrato Display - Value +/-
• Display and adjustment of
Eff ect assigns