StarTech.com PDU02IPSC Manual - Manual (Page 9)

Instruction Manual
5
IP Search Utility
NOTE: The workstation and the PDU must be on the same LAN for the IP Search Utility
to detect it, and the Windows Firewall must also be turned off.
1. Open the Windows Control Panel
2. Select Windows Firewall
3. Select Off and then click the OK button
4. Insert the provided CD in the CD-ROM drive
5. Launch the IP Search Utility program
6. Click on the Refresh button to search for all PDU02IPxx units on the LAN
7. Click on the detected PDU and configure the IP address, Gateway and Net Mask,
then click the Configure button twice. You will see the values you specified populate
in the main window
8. Repeat step 7 for each device if you have multiple PDU02IPxx units connected
9. Once all devices are configured, close the IP Search Utility program and turn the
Windows Firewall back on