Logging in for the first time – StarTech.com PDU02IPSC Manual User Manual
Page 8
Instruction Manual
4
Logging In for the First Time
The minimum requirement to operate the PDU is to setup the IP Address, subnet mask,
and default gateway, which can be done through your web browser or using the IP
Search Utility application on the CD.
Default Settings:
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
User name / Password: admin / admin (lower case)
Web Browser Method
NOTE: The workstation and the PDU must be on the same LAN
1. Open a web browser and input the default IP address (192.168.1.10)
2. After the login screen appears enter admin / admin for the User name and Password
3. Click on the System tab from the menu bar of the web interface and then click on
Network to set the IP address and network info of this device