StarTech.com PDU02IPSC Manual - Manual (Page 11)

Instruction Manual
7
Monitor Section
The Monitor section shows you the current status of each outlet and allows you to
modify the power state of each outlet individually, or make global changes to both.
From the Monitor tab you can also Schedule events and configure the
Auto-Ping feature.
Configuration Tab
Click on the Set button located on the top corner of each outlet to modify an
individual outlet. When the Set button is orange, the outlet is ready to be configured.
Description: Allows you to give each outlet a more meaningful name if desired
Start Delay Time: Each outlet can be programmed to startup at different time
intervals instead of both of them starting up at the same time.
Shutdown Delay Time: Each outlet can be programmed to shutdown at different
time intervals instead of shutting both of them down at the same time.
Save: Saves all changes.