StarTech.com SV431USBAN - Manual (Page 8)

Instruction Manual
4
Hardware Guide - Continued
Component Description
1
Port Selection
Switches
Pressing a switch brings the focus to the computer
attached to its corresponding port.
2
Upper: KVM
DIM Orange: indicates the computer attached to
its corresponding port is up and running (Online).
Bright Orange: Indicates the computer attached
to the corresponding port is the one that has the
KVM focus (Selected)
Flashes to indicate that the computer attached to
the corresponding port is being accessed under
Auto Scan mode
Lower: USB
Dim Green: Indicates there is a USB cable
connection to the computer attached to the
corresponding port. Does not light if there is no
USB connection to the computer.
Bright Green: to indicate the computer attached
to the corresponding port has access to the USB
peripherals.
3
Indicate data transmission status of corresponding ports on the Ethernet
hub:
LAN Link
Off: No data connection to the computer attached
to its corresponding port.
On: Data connection to the computer attached to
the corresponding port is detected.
Flashing: Data is being transmitted through the
port.
10/100 Mbps
Off: Data transmission speed is 10 Mbps
On: Data transmission speed is 100 Mbps
4 USB Hub Section USB peripherals can plug into either port
5 Ethernet Port Section
The CAT5 LAN cable that connects to the
computer’s Ethernet port can plug into any
available port