StarTech.com SV431USBAN - Manual (Page 17)

Instruction Manual
13
Alternate HSM Invocation Keys
An alternate set of HSM invocation keys is provided in case the default set conflicts
with programs running on the computers. To switch to the alternate HSM invocation
set, do the following:
1. Invoke HSM (see “Invoking Hotkey Setting Mode”).
2. Press and release the [H] key
The HSM invocation keys become the [Ctrl] key and [F12] (instead of [Num Lock] and
minus [-] ).
Please Note: This procedure is a toggle between the two methods. To revert back
to the original HSM invocation keys, invoke HSM, then press and release the [H] key
again.
Alternate Port Switching Keys
The port switching activation keys can be changed from tapping the Scroll Lock key
twice ([Scroll Lock] [Scroll Lock]) to tapping the Ctrl key twice. To change the port
switching activation keys, do the following:
1. Invoke HSM (see “Invoking Hotkey Setting Mode”).
2. Press and release the [T] key
Please Note: This procedure is a toggle between the two methods. To revert back to
the original [Scroll Lock], [Scroll Lock] method, invoke HSM, then press and release the
[T] key again.
Keyboard Operating Platform
The KVM Switch’s default port configuration is for a PC Compatible keyboard operating
platform. If your requirements call for different port settings (you have a Mac or
Sun attached to a port, e.g.), you can change a port’s keyboard operating platform
configuration as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see “Invoking Hotkey Setting Mode”).
3. Press and release the appropriate Function key (see table below). After completing
a setting, you automatically exit HSM.