StarTech.com SV431USBAN User Manual
Page 24
Instruction Manual
20
Starting the Upgrade
Please Note: The screenshots in this section are for example purposes. The screens that
appear during your firmware upgrade may vary slightly as to their wording and descriptions.
To upgrade your Firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double clicking the
file icon, or by opening a command line and entering the full path to it.
The Firmware Upgrade Utility will begin to extract the files necessary for installation
:
2. The Firmware Upgrade Utility main screen appears
• The Utility inspects your installation. All the devices capable of being upgraded by
the package are listed in the Device List panel.
• As you select a device in the list, its description appears in the Device Description
panel (shown following page)