Casio EX-Z30/EX-Z40 - Manual (Page 82)

82
OTHER RECORDING FUNCTIONS
1. In the REC mode, press [MENU].
2. Select the “REC” tab, select “REC Mode”, and
then press [
̈
].
3. Use [
̆
] and [
̄
] to select “ ( + )” and
then press [SET].
• This enters the Snapshot Audio Mode.
4. Press the shutter
release button to
record the image.
• After the image is
recorded, the camera
enters audio recording
standby, with the image
you just recorded on the
monitor screen.
• You can cancel audio recording standby by pressing
[MENU].
Remaining recording time
5. Press the shutter release button to start audio
recording.
• The green operation lamp flashes as recording is
performed.
• Even if you have the monitor screen turned off (page
25), the monitor screen turns on while you are
adding audio to a snapshot.
6. Recording stops after about 30 seconds or
when you press the shutter release button.