StarTech.com ST128UTPE - Manual (Page 4)

Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com VGA Cat5 Splitter/Extender. Combined with
one or more StarTech.com remote receivers (STUTPRXL - sold separately), you can
display the image from a computer or other VGA image source on multiple remote
displays at distances of up to 1000 feet (300 meters). With no drivers or software to
install, this VGA Extender offers simple setup and crystal-clear images at resolutions of
up to 1280 x 1024 pixels.
Packaging Contents
• 1x UTP Video Splitter Base Unit
• 1x Power Adapter
• 1x 6ft (1.8m) VGA Cable
• 1x Instruction Manual
System Requirements
• 1 x STUTPRXL Remote Receiver module for each remote display (not provided)
• 1 x HD15 male-to-male VGA cable
• Category 5 Ethernet cable terminated at each end with RJ-45 connectors, one for
each remote display (if using surface cabling)
OR
Category 5 Ethernet cable terminated at each end in a wall-mounted outlet, with a
standard Category 5 patch cable, two for each remote display (if using premises cabling)
Do you need additional cables? Visit www.startech.com to find what you need and the
name of your local StarTech.com dealer.
NOTE: The total length of RJ45 cables supporting each remote display cannot exceed
1000 feet (300 meters) from the VGA Extender unit to the remote.
Features
• Display the image from a local computer on multiple remote displays at distances
up to 1000ft (300m)
• Hardware-only solution: no drivers or software to install or configure
• Uses industry-standard Category 5 Ethernet cable
• Supports resolutions of up to 1280 x 1024 at 60Hz refresh (depends on distance of
remote displays)