StarTech.com ST128UTPE - Manual (Page 6)

Instruction Manual
3
Installing the VGA Extender and Splitter (local)
1. Place the VGA Extender (ST128UTPE/ST124UTPE) near the local computer.
2. Switch off the computer.
3. Connect the data cable from the local computer display to the OUTPUT port on the
VGA Extender.
4. Connect the HD15 male-to-male VGA cable (provided) to the INPUT port on the
VGA Extender.
5. Connect the other end of the HD15 male-to-male VGA cable to the VGA Out
connection on the local computer (originally occupied by the local computer
display).
6. Connect the Ethernet cable connection for each Remote Receiver to an RJ-45 port
on the VGA Extender (marked Cat. 5).
7. Connect the AC Adapter (provided with local unit) into an appropriate power source
and plug the opposite end into the DC/12V port on the VGA Extender.
Step 6 (See Below)
*ST128UTPE shown
Step 3
(See Below)
Step 4
(See Below)
Step 7
(See Below)
Front
Back