StarTech.com SVIDUTPEXT User Manual
Instruction manual, Packaging contents, System requirements
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/22/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 2 x S-Video Extenders (local and remote ends)
• 1 x 20cm S-Video cable
• 1 x Installation/Mounting Kit
• 1 x User Manual
System Requirements
• An S-Video Source
• Input and Output S-Video cables
• A display with an available S-Video input
SVIDUTPEXT
S-Video Extender over Cat 5
Basic Setup
Video Source
Local
Distant
Display Unit
Up to 200M
1. Connect the S-Video cable to the output on the back of the video source.
2. Connect the opposite end of the S-Video cable used in Step 1 to SVIDUTPEXT local unit (marked VIDEO).
3. Connect the Cat5 cable to the RJ45 port on SVIDUTPEXT local unit.
4. Connect the opposite end of the Cat5 cable to the RJ45 port on the SVIDUTPEXT remote unit.
5. Connect the second S-Video cable to the designated port on the output SVIDUTPEXT unit (marked VIDEO).
6. Connect the remaining end of the second S-Video cable to the monitor/display. For further instructions on how to locate the S-Video port
on your display, please refer to the documentation that accompanied the display at the time of purchase.
*actual product may vary from photos