Source Audio Soundblox 2 Stingray Multi-Filter - Manual (Page 8)

8 | Contols: Knobs
1 2
CONTROL
INPUT
OPTION
SELECT
ENV- ENV+
DEPTH
OPTION
SPEED
DELAY/FREQ
FEEDBACK
VOLUME
TREMOLO
MIX
(HOLD)
DEFAULT
HH
MIDI
EXP
FLANGER
CHORUS
PHASER
RESONATOR
MOD SOURCE
4 STAGE
QUAD
CLASSIC
THRU
ZERO
SHADOW
RES 1
RES 2
VIBE
6 STAGE
8 STAGE DUAL
12 STAGE
O RB I TAL
MODU L A T OR
B
A
C
DEPTH Knob (A): The DEPTH knob adjusts the range and direction of
the filter sweep.
OPTION Knob (B): The OPTION knob controls six different parameters,
each selected by the OPTION SELECT button. Press the OPTION SELECT
button (C), located to the left of the OPTION knob, to cycle through all six
choices. The selected parameter is indicated by one of three green/red
LEDs. Green indicates the upper parameter (white print), and red
indicates the lower parameter (yellow print).
| 21 External Control
1 2
CONTROL
INPUT
ENV- ENV+
DEPTH
OPTION
SPEED
DELAY/FREQ
FEEDBACK
VOLUME
TREMOLO
MIX
HH
MIDI
EXP
MOD SOURCE
A
B
CONTROL ASSIGN
By default, the expression pedal and Hot Hand inputs control the filter
modulation. This can be easily changed to control any of the adjustable knob
parameters. To assign control to a knob parameter, follow the instructions
below:
1. Select the desired external control option: “HH” for Hot Hand, “EXP” for
expression pedal.
2. Press and hold the CONTROL INPUT button (A) until the LED begins to
blink slowly.
3. Set the low position of the desired knob, for example SPEED (B), to the
slowest setting you would like to use.
4. Press the CONTROL INPUT button again, and the LED will now blink
more rapidly.
Stingray Manual - pages 8, 21