SilentKnight 5883 Relay Interface Board - Manual (Page 3)

Wiring
P/N 151194 3
12-Pin Input Connector
The 5883’s 12-Pin input connector (P1) plugs
directly onto any of the 12-pin connectors on the
5880.
The following table list the pin-outs for the P-1
pin connector on the 5883.
Relay Wiring
The 10 on-board relays are all Form C relays.
Figure 4 is an example of how the relays can be
used.
Figure 4: Relay Wiring Example
Pin
Number
Function
Pin
Number
Function
1 Trigger Relay 1 7 Trigger Relay 7
2 Trigger Relay 2 8 Trigger Relay 8
3 Trigger Relay 3 9 Trigger Relay 9
4 Trigger Relay 4 10 Trigger Relay 10
5 Trigger Relay 5 11 +5 VDC
6 Trigger Relay 6 12 Not Used
12
1
P1
Must be wired within
3 feet of the 5883 and
run in conduit.