SIG SAUER P232 - Manual (Page 31)

P232 Operators Manual 29 OM-P232-USA VER 07.10.01
9.0. Maintenance
9.1. Pistol Disassembly
1. Unload the pistol (see section 5.0 “Unloading the Pistol” on
page 22).
2. Remove the magazine from the pistol.
3. Retract the slide to the stop and verify visually and physically
there is no round in the chamber.
4. Release the slide and allow it to close fully.
5. Rotate the takedown lever (16) to a vertical position.
Verify the magazine is removed - visually and
physically confirm the pistol is unloaded before
attempting disassembly or performing any
maintenance steps. Failure to ensure the firearm
is unloaded could result in unintentional
discharge, causing injury or death.
VERIFY THE FIREARM
IS UNLOADED
WARNING - MAINTENANCE
OM-P232-USA 07-10-01.qxp 2/13/2008 9:55 AM Page 29