SIG SAUER P232 - Manual (Page 15)

P232 Operators Manual 13 OM-P232-USA VER 07.10.01
AMMUNITION
1. Use only high quality, original, factory-manufactured
ammunition. Do not use cartridges that are dirty, wet, corroded,
bent, or damaged. Do not oil cartridges. Do not spray aerosol-type
lubricants, preservatives, or cleaners directly onto cartridges or
where excess spray may flow into contact with cartridges.
Lubricant or other foreign matter on cartridges can cause
potentially dangerous ammunition malfunctions. Use only
ammunition of the caliber for which your firearm is chambered.
The proper caliber is permanently engraved on your firearm;
never attempt to use ammunition of any other caliber.
2. The use of reloaded, “remanufactured” hand-loaded, or other
non-standard ammunition voids all warranties. Reloading is a
science and improperly loaded ammunition can be extremely
dangerous. Severe damage to the firearm and serious injury to the
shooter or to others may result. Always use ammunition that
complies with the industry performance standards established by
the Sporting Arms and Ammunition Manufacturers’ Institute, Inc.
of the United States (SAAMI) or ammunition manufactured to
military specifications.
AMMUNITION (CARTRIDGE) NOTICE
SIG SAUER SPECIFICALLY DISCLAIMS
RESPONSIBILITY FOR ANY DAMAGE OR INJURY
WHATSOEVER OCCURRING IN CONNECTION WITH,
OR AS A RESULT OF, THE USE IN ANY SIG SAUER
FIREARM OF FAULTY, NON-STANDARD,
“REMANUFACTURED” HAND LOADED (RELOADED)
AMMUNITION, OR CARTRIDGES OTHER THAN THOSE
FOR WHICH THE FIREARM WAS ORIGINALLY
CHAMBERED.
OM-P232-USA 07-10-01.qxp 2/13/2008 9:52 AM Page 13