Sceptre X220T-Naga - Manual (Page 6)

Page6 SCEPTRE X22
• Do not attempt to repair or service the product
yourself. Opening or removing the back cover
may expose you to high voltages, the risk of
electric shock, and other hazards. If repair is
required, please contact your dealer and refer all
servicing to qualified service personnel.
•
Keep the product away from moisture. Do not
expose this appliance to rain or moisture. If water
penetrates into the product, unplug the power
cord and contact your dealer. Continuous use in
this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs.
If any smoke or odor becomes apparent, unplug
the power cord and contact your dealer
immediately. Do not try to repair the product
yourself.
• Avoid using dropped or damaged appliances. If
the product is dropped and the housing is
damaged, the internal components may function
abnormally. Unplug the power cord immediately
and contact your dealer for repair. Continued use
of the product may cause fire or electric shock.
• Do not install the product in an area with heavy
dust or high humidity. Operating the product in
environments with heavy dust or high humidity
may cause fire or electric shock.
• Hold the power connector when removing the
power cable. Pulling the power cable itself may
damage the wires inside the cable and cause fire
or electric shocks. When the product will not be
used for an extended period of time, unplug the
power connector.
•
To avoid risk of electric shock, do not touch the
connector with wet hands.
•
Insert batteries in accordance with instructions
while using the remote control. Incorrect
polarities may cause damage and leakage of the
batteries, operator injury and contamination the
remote control.
• If any of the following occurs please contact the
dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into
the X22 LCD MONITOR.
o The Display is exposed to rain or
other moisture.
o The Display is dropped or damaged
in any way.
o The performance of the Display
changes substantially.
• Operating environment: Temperature: 5°C ~
35°C, Humidity: 10% to 90% non-condensing,
Altitude: 0~10,000 ft.