Sceptre X220T-Naga - Manual (Page 26)

Page26 SCEPTRE X22
MISCELLANEOUS
This function adjusts many loose options inside the monitor.
1. Press MENU to open the OSD then highlight MISCELLANEOUS by pressing with the
VOLUME or SOURCE buttons.
2. Press MENU to enter the function.
3. Press with the VOLUME or SOURCE buttons to select the option you want to adjust and
press MENU to adjust the function.
4. Press the VOLUME or SOURCE buttons to adjust the value of the option.
i. SHARPNESS – This option adjusts the sharpness of the graphics and text.
ii. INPUT SELECT – This option lets you select the input you want.
iii. OVER DRIVE – This option helps increase pixel response time reducing
ghosting effects.
iv. DCR – This option turns dynamic contrast on or off.
v. OVERSCAN – This option allows you to turn off the video crop when you are
under HDMI.
vi. DISPLAY INFORMATION – This option shows the monitor’s information
such as resolution and refresh rate.
Please Note :
• You can switch sources easily by using the SOUCE button on the side of the
monitor.
EXIT
This function exits the OSD menu.
1. Select the EXIT function with the VOLUME or SOURCE buttons and press MENU to exit.