Sceptre X220T-Naga - Manual (Page 19)

SCEPTRE X22 Page19
SOURCE
This function lets you switch the source from VGA to DVI or vice versa.
1. You can use this function by pressing
○
S button, and then press the MENU button to
select the source you want. This will change your source to the other connection.
LUMINANCE
This function adjusts the brightness and contrast of the LCD.
1. To use this function, press MENU to open the OSD then highlight LUMINANCE function by
pressing the VOLUME or SOURCE button.
2. Press MENU to enter the function.
3. Press VOLUME or SOURCE button to select BRIGHTNESS or CONTRAST to adjust.
4. Press MENU to select the option you want to adjust.
5. Use the VOLUME or SOURCE button to adjust the values.
Please Note :
•
BRIGHTNESS adjusts the black level in a picture. If the value is adjusted too high,
the picture will look washed out. If too low, the picture will not have much detail in
dark colors.
•
CONTRAST adjusts the white levels in a picture. If the value is adjusted too high,
the picture will not have any details in bright parts of the picture. If set too low,
the picture will looked washed out.