Connecting the lcd to your pc – Sceptre X220T-Naga User Manual
Page 15
SCEPTRE X22 Page15
Connecting the LCD to Your PC
If You Have DVI Connection on Your Video Card…
1.
Make sure the power of X22 LCD MONITOR is turned off.
2.
Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your X22 LCD MONITOR.
3.
Obtain the audio cable and connect the 3.5 mm Mini-jack cable to the Audio Line In
connection of the monitor. Connect the other end of the 3.5 mm Mini-jack cable to your
PC’s audio line out connection.
4.
Turn on the power of both the X22 LCD MONITOR and the PC.
Please Note :
•
Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card’s technical support.
•
The PC’s clearest picture is produced under 1680x1050 at 60Hz.