Sceptre X220T-Naga - Manual (Page 5)

SCEPTRE X22 Page5
Tips and Safety Precautions
This product is designed and manufactured to operate within defined design limits, and misuse may result in electric
shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation,
use and maintenance of the product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
•
To avoid the risk of electric shock or component
damage, switch off the power before connecting
other components to the X22 LCD MONITOR.
•
Unplug the power cord before cleaning the X22
LCD MONITOR. Do not use a liquid or a spray
cleaner for cleaning the product. Do not use
abrasive cleaners.
•
Always use the accessories recommended by
the manufacturer to insure compatibility.
•
When moving the X22 LCD MONITOR from an
area of low temperature to an area of high
temperature, condensation may form on the
housing. Do not turn on the X22 LCD MONITOR
immediately after this to avoid causing fire,
electric shock or component damage.
• Do not place the X22 LCD MONITOR on an
unstable cart, stand, or table. If the X22 LCD
MONITOR falls, it can injure a person and cause
serious damage to the appliance. Use only a cart
or stand recommended by the manufacturer or
sold with the X22 LCD MONITOR.
• Any heat source should maintain a distance of at
least 5 feet away from the X22 LCD MONITOR,
i.e. radiator, heater, oven, amplifier etc. Do not
install the product too close to anything that
produces smoke or moisture. Operating the
product close to smoke or moisture may cause
fire or electric shock.
• Slots and openings in the back and bottom of the
bezel are provided for ventilation. To ensure
reliable operation of the X22 LCD MONITOR and
to protect it from overheating, be sure these
openings are not blocked or covered. Do not
place the X22 LCD MONITOR in a bookcase or
cabinet unless proper ventilation is provided.
•
It is not recommended to use the X22 LCD
MONITOR in a portrait format (by rotating 90
degrees) under high temperature environment
(25°C or higher), since this would retard heat
dissipation and would eventually damage the
monitor.
•
Never push any object into the ventilation slots of
the X22 LCD MONITOR. Do not place any
objects on the top of the Product. It could short
circuit parts causing a fire or electric shock.
Never spill liquids on the X22 LCD MONITOR.
•
The X22 LCD MONITOR should be operated
only from the type of power source indicated on
the label. If you are not sure of the type of power
supplied to your home, consult your dealer or
local power company.
• The power cable must be replaced when using
different voltage from that specified in the User
Manual. For more information, contact your
dealer.
• The X22 LCD MONITOR is equipped with a
three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will fit only into a
grounded power outlet as a safety feature. If your
outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or
use an adapter to ground the appliance safely.
Do not defeat the safety purpose of the grounded
plug.
• Do not overload power strips and extension
cords. Overloading can result in fire or electric
shock.
• The wall socket should be installed near the
equipment and should be easily accessible.
• Only the marked power source can be used for
the product. Any power source other than the
specified one may cause fire or electric shock.
•
Do not touch the power cord during
thunderstorms. To avoid electric shock, avoid
handling the power cord during electrical storms.
•
Unplug the unit during a lightning storm or when
it will not be used for a long period of time. This
will protect the X22 LCD MONITOR from
damage due to power surges.