ScanTool Ready-or-Not - Manual (Page 9)

Status bars at the bottom of the dialog are used to display the COM
port number, confirmation of send/receive, and the name of the
currently selected configuration preset.
The menu has four options:
— records current configuration to
the currently loaded file. If no file is
loaded, the operation is identical to "Save
As..."
— allows user to select the
name for the configuration file.
— loads previously recorded
configuration settings.
— terminates the program.
The menu has two options:
— displays the
Program Options dialog.
— restores
the default configuration settings,
which are compatible with most
vehicle inspection programs.
— select the
correct port number for communicat-
ing with the device.
— show helpful hints
when cursor hovers over a user
interface item (button, checkbox, etc).
— refresh the list
of available COM ports.
Menus
Program Options Dialog
File
Save
Save As...
Open
Exit
Tools
Program Options
Reset Factory Defaults
COM Port Number
Show Hints
Detect Com Ports
—
—
—
—
—
—
—
—
—
Use
config
utility
9 Ready-or-Not User Guide TM