Reznor JT4BD Option - Installation - Snow Stand - Manual (Page 2)

2
This Kit Includes:
a. Installation Instructions – 709062
b. Four (4) Legs – Part Number 664553
c. Four (4) Side Braces – Part Number 664554
d. One (1) Center Braces – Part Number 664555
e. Twenty (20) Black Screws – Part Number 600442
LEG,SNOWBASE
BRACE,SIDE,
SNOWBASE
BRACE,CENTER,
SNOWBASE
ASSEMBLY INSTRUCTIONS
1. Stand one Leg on its end and line up the holes with
the holes at the end of one of the Side Braces. In-
sert the tabs on the sides of the Legs into the slots
in the Side Braces. Using a screw gun with either
a 5/16” hex bit or a flat head screwdriver bit, drive
one screw per hole through the Leg and into the
Side Brace.
2. Using the same method as in Step 1, attach an-
other Side Brace to the second set of holes on the
Leg.