Reznor R6GN Option - Installation - Support Leg (560258) User Manual

Reznor Radiators

IN STAL LA TION

IN STRUC TION

INSTALLATION INSTRUCTIONS FOR

560258

ADJUSTABLE SUPPORT LEG KIT

FORM# 536D-0711

I - SHIPPING AND PACK ING LIST

Package 1 of 1 contains:

2 ea. - Adjustable Support Leg Assembly

6 ea. - Self Tapping Screws

Check contents for shipping damage. Contact the last carrier immediately if any shipping damage is found.
II - AP PLI CA TION
This adjustable support leg kit is constructed of 18 gauge galvanized steel and can be used on any of

NORDYNE's

product where equipment stabilization, support of cantilevered loads, or support of add on accessories such as Horizontal

Economizers, Power Exhaust, ERV’s, etc., is required.

NOTICE:

Read these instructions in their entirety before proceeding with the installation of this accessory kit. Special

attention is required for placement of these supports so damage to internal components of unit and roofing

material is avoided.

This kit is to be installed by a qualified service technician in accordance with these instructions and all codes

having jurisdiction. Failure to follow these instructions could result in serious injury, property damage, or

death. These instructions are primarily intended to assist qualified individuals experienced in the proper

installation of this appliance. Some local codes require licensed installation/service personnel for this type

of equipment.

R6GN-180 Series Shown

This kit can also be used for the

fol low ing ap pli ca tions:

Nordyne Series Roof Curbs

Car rier

Downflow

Hor i zon tal

Se ries

14"

18"

24"

24" w/ Duct 48DP/DR

R6GN-150* Series Gas/Electric units

555617

555618

555619

555620

555631

555632

All

R6GN-180* Series Gas/Electric units