Cybex CX-445T - Manual (Page 47)

2. Resetting the service odometer.
A. While in Dormant Mode enter Test Mode by pressing and holding the Pause/Stop key
for five seconds.
B. Press the Cool Down key to display “SVC” and miles or kilometers on service
odometer.
C. Press the or key to display “RST”.
D. Press the Enter key to reset the service odometer to zero.
NOTE: Service may be performed before the 12,000 miles (19,300 km) service prompt
appears. Perform the service on the unit and follow the above procedure to reset the
service odometer to zero.
Cybex 445T Treadmill Owner’s Manual
Preventive
Maintenance
Page 4-7