beautypg.com

Adjusting the separation roller gap – Canon CR-50 User Manual

Page 52

background image

52

E

Set the ink cartridge.

For more information, see “Setting the Ink Cartridge and
Adjusting the Print Position,” on p. 24.

F

Carefully replace the Imprinter Cover.

G

Gently close the Maintenance Cover until it clicks into place.

Adjusting the Separation Roller Gap

If double feed should occur too often, adjust the Separation Roller gap
according to the following procedure.

IMPORTANT

• Make sure that the size, thickness, and weight of your document meets the

conditions of this scanner. See “Document,” on p. 33.

• Your unit has been carefully adjusted to meet most conditions. However,

the below adjustment may be needed depending on your environment
(humidity, temperature, etc.) and the documents you are scanning
(checks, etc.). Perform the adjustment only if necessary.

A

Hook your finger around the open lever and open the
Maintenance Cover.