Technical specifications, Technical data, Hardware specifications – RED ROCKET User Manual
Page 26: Supported input formats, Red rocket installation instructions

COPYRIGHT © 2014 RED.COM, INC
RED ROCKET INSTALLATION INSTRUCTIONS
955-0035, REV-B
|
26
TECHNICAL DATA
CAUTION: The chassis of the computer system where the RED ROCKET board is installed must be equipped with
sufficient ventilation to ensure proper cooling.
PCI Bus Requirements
PCIe x16 physical slot providing at least 8 lanes (x8)
Board Size
Approx. 10" length, single-slot
Electrical Type
3.3/12 volt
Power Consumption
35 W
Conformity
Specification 1.1
Operating Temperature Range
5°C to 40°C (41°F to 104°F)
Storage Temperature Range
-17°C to 70°C (0°F to 158°F)
Operating Humidity Range
20% to 80% relative humidity, non-condensing
Storage Humidity Range
10% to 80% relative humidity, non-condensing
HARDWARE SPECIFICATIONS
VIDEO
OUTPUT
DVI (Digital)
4 DVI-I via break-out cables
Serial Digital 4:2:2 8/10 bit (Single Link)
1 BNC
Serial Digital 4:4:4 8/10/12 bit (Dual Link)
2 BNC
TIMECODE
OUTPUT
Vertical (VITC)
1 BNC (Via Video Out)
DATA FORMATS
Color Modes
YCbCr 4:2:2 RGB 4:4:4
Internal Processing Real-time REDCODE decoding, debayering, and scaling
SUPPORTED INPUT FORMATS
The RED ROCKET supports all RED ONE, EPIC MYSTERIUM-X, and SCARLET MYSTERIUM-X formats.
NOTE: RED ROCKET does not process footage from RED EPIC MONOCHROME and RED DRAGON cameras.
A
TECHNICAL
SPECIFICATIONS