RED ROCKET - Manual (Page 15)

RED ROCKET INSTALLATION INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC 955-0035, REV-B | 15
9. Click Shut Down to finish installing the software.
Your computer shuts down.
10. If the RED ROCKET is in a Thunderbolt chassis, disconnect power from the Thunderbolt chassis after the
computer fully shuts down.
11. Wait a minimum of 60 seconds.
12. If the RED ROCKET is in a Thunderbolt chassis, power up the Thunderbolt chassis.
13. Start the computer.
14. To upgrade RED ROCKET firmware, go to
“Upgrade RED ROCKET Firmware” on page 19 .
INSTALL RED ROCKET DRIVER (WINDOWS)
To install the RED ROCKET driver for Windows operating systems, follow the instructions below:
1. Ensure that you have already downloaded the RED ROCKET Installer. For more information about how to
download the RED ROCKET Installer, go to “Download Driver and Firmware” on page 12 .
2. Ensure that you have already installed the RED ROCKET.
3. Click Start, right-click Computer, and select Properties.
The System window opens.