Ram Trucks 2013 Chassis Cab - User Guide - Manual (Page 140)

FLUIDS AND CAPACITIES
Gasoline Versions
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant
5.7L 3500 Models
We recommend you use MOPAR ® Antifreeze/
Coolant 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology) .
18.7 Quarts
(17.7 Liters)
Engine Oil with
Filter 5.7L
We recommend you use API certified 5W-20
engine oil, meeting the requirements of
Chrysler Material Standard MS-6395. Refer
to your oil filler cap for correct SAE grade.
5.7L 7 Quarts
(6.6 Liters)
Fuel Selection
5.7L
87 Octane Acceptable. 89 Octane
Recommended
Standard Rear
Tank - 52 Gallons
(197 Liters) (Ap-
proximate) Op-
tional Midship
Tank - 22 Gallons
(83 Liters) (Ap-
proximate)
Engine Oil Filter
5.7L
We recommend you use a MOPAR ® Engine
Oil Filter.
—
Spark Plugs 5.7L
We recommend you use MOPAR ® Spark
Plugs (Gap 0.043 in [1.09mm])
—
Automatic Trans-
mission (5.7L En-
gine Only)
We recommend you ONLY use MOPAR ®
ATF+4 ® Automatic Transmission Fluid.
Failure to use ATF+4 fluid may affect the func-
tion or performance of your transmission.
—
Transfer Case
We recommend you use MOPAR ® BW44-44
Transfer Case Fluid.
—
Front and Rear
Axle 4500/5500
Models
We recommend you use GL-5 SAE 75W-90
Synthetic (MS-9763).
—
Brake Master
Cylinder
We recommend you use MOPAR ® DOT 3 and
SAE J1703. If DOT 3 brake fluid is not
available, then DOT 4 is acceptable.
—
Power Steering
Reservoir
We recommend you use MOPAR ® Power
Steering Fluid +4, MOPAR ® ATF+4 ® Auto-
matic Transmission Fluid.
—
MAINTAINING YOUR VEHICLE
138