Ram Trucks 2013 Chassis Cab - User Guide - Manual (Page 107)

• Press the RIGHT arrow on the steering wheel to enter “VEHICLE SETTINGS.”
• Press the UP or DOWN buttons until Trailer Brake Type appears on the screen.
• Press the RIGHT arrow and then press the UP or DOWN buttons until the proper
Trailer Brake Type appears on the screen.
GAIN Adjustment Buttons (+/-)
• Pressing the +/- buttons, located on
the left side of the module, will
increase/decrease the brake control
power output to the trailer brakes in
0.5 increments. The GAIN setting can
be increased to a maximum of 10 or
decreased to a minimum of 0 (no
trailer braking).
• Refer to your Owner's Manual on the
DVD for further details.
WARNING!
Connecting a trailer that is not compatible with the ITBM system may result in
reduced or complete loss of trailer braking. There may be a increase in stopping
distance or trailer instability which could result in personal injury.
AUXILIARY SWITCHES
• There are four auxiliary switches located in the lower switch bank of the
instrument panel which can be used to power various electronic devices. Connec-
tions to the switches are found under the hood in the connectors attached to the
auxiliary Power Distribution Center.
• For further information on using the auxiliary switches please refer to the Dodge
Body Builders Guide by accessing www.dodge.com\bodybuilder and choosing the
appropriate links.
UTILITY
105