Perfect Aire 1PAMSH22-15 User Manual - Manual (Page 7)

6
Manual operation can be used temporarily in case the remote control is disabled or
the unit requires maintenance.
OPERATING INSTRUCTIONS
Manual operation
Manual control
button
AUTO/COOL
Suspension bars
AUTO/COOL
1
2
Manual control
button
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
For 22K Btu model, please use suspension
bars to prop up the panel.
One press of the manual control button will
lead to the forced “AUTO” operation. If you
press the button twice within five seconds,
the unit will operate under forced “COOL”
operation. Close the panel firmly to its
original position.
This button is used for testing purposes
only. You should not choose it.
To restore the remote control operation,
use the remote control directly.
CAUTION:
1
3
2
NOTE: The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
NOTE: This manual does not include Remote Control Operations, see the
<> packed with the unit for details.
Operating temperature
Mode
Temperature
Room temperature
Outdoor temperature
1. Optimum performance will be achieved within these operating temperatures. If air
conditioner is used outside of the above conditions, certain safety protection features
might come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please set the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
NOTE:
Cooling operation Heating operation Drying operation
62ºF(17ºC)
For the models with low
temperature cooling system
86ºF(30ºC) 50ºF(10ºC)
32ºF~122ºF
(0ºC~50ºC)
(5ºF~122ºF/-15ºC~50ºC
5ºF~86ºF
(-15ºC~30ºC)
32ºF~122ºF
(0ºC~50ºC)