Т³гж 11, Normal sounds air conditioner features, Electronic control operating instructions 5 – Perfect Aire PAHP12002 User Manual
Page 6
![background image](/manuals/708566/6/background.png)
UNIT CONTROL
TO TURN UNIT ON OR OFF:
Press
ON/OFF button to turn the unit on or off.
TO CHANGE TEMPERATURE SETTING:
Press
temperature setting.
UP/DOWN button to change the
/
NOTE:Press or hold either UP( ) or DOWN ( ) button
until the desired temperature is seen on the display.
This temperature will be automatically maintained
O
O
O
O
anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to read the actual room
temperature, see “To Operate on Fan Only” section.
(Cooling Only Models)
(Electric Heater & Heat Pump Models)
TEMP/TIMER
Fan
Mode
Sleep
Timer
Check
Filter
Energy
Saver
REMOTE SIGNAL
RECEPTOR
Follow
Me
Auto
High
Med
Low
On
Off
Auto
Fan
Cool
Dry
TEMP/TIMER
TEMP/TIMER
Fan
Mode
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Auto
High
Med
Low
On
Off
Auto
Fan
Cool
Dry
TEMP/TIMER
Heat
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan.
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
“pinging” or “switching” sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
“Gurgling” or “hissing” noise
may be heard due to refrigerant
passing through evaporator
during normal operation.
NORMAL SOUNDS
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions.
Then, follow the symbol for the functions you desire. The unit can be controlled by the unit controls alone or with the
remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
5
NOTE: This illustration is for explanation purposes only. The actual appearance of the control
panel on the air conditioner purchased may be sightly different.
NOTE: The unit will automatically initiate the
Energy Saver function under “Cool,” “Dry” and
“Auto” (only Auto-Cooling and Auto-Fan) modes.