Perfect Aire PAHP12002 - Manual (Page 13)

FIG. 14A FIG. 14B
FIG. 16 FIG. 17
FIG. 15
A
B
C
A
B
A. Window channel
B. Left-hand curtain
C. #10 x 3/4″ (or 1/2″)
round-head screw
Attach Side Curtains to Window Frame:
1. Extend the side curtains out against the window frame
(FIG. 11/page. 13).
2. Drill holes and drive locking screws:
A: For wooden windows:
Use a 3/32″ drill bit to drill 4 starter holes through the holes
in the side curtains into the window. Drive four #10 x 3/4″ or
(1/2”) locking screws through the holes in the side curtains
into the window sill and window frame (FIG. 14A, FIG. 14B).
B: For Vinyl-Clad windows:
Use an 1/8″ drill bit to drill two holes through the holes in the
side curtains into the window frame as shown (FIG. 14A).
Drive two #10 x 3/4″ or (1/2″) locking screws through the holes
in the side curtains into the window sash (FIG. 14A).
3. Trim the weather seal (6″ x 3/4″ x 1/12″) with proper length,
peel off the protective backing and plug any gaps if needed as
shown (FIG. 14B).
Complete Installation:
1. Insert window sash seal behind the top of the lower window sash and against the glass of the upper
window (FIG. 15).
2. Place the window-lock bracket on top of lower window and against upper window sash on right side
of the window (FIG. 15).
3. Use a 3/32″ drill bit to drill starter holes through the holes in the bracket into the window sash (FIG. 15).
4. Attach the window lock-bracket to the window sash with two #10 x 3/4″ or (1/2″) round-head screws to
secure window in place (FIG. 15).
5. Insert air conditioner into cabinet (FIG. 16).
6. Insert front tabs of front panel into top of cabinet and swing
front into place.
7. Attach bottom front of panel with front panel screws (FIG. 17).
8. Plug into a grounded 3 prong outlet.
9. Press RESET on the power supply cord.
A
B
C
D
A. Window lock bracket
B. Upper window glass
C. Window sash seal
D. #10 x 3/4″ or (1/2)″
round-head screws
12
A. #10 x 3/4″ (or 1/2″)
round-head screw
B. Slotted hole in the
bottom of the curtain
INSTALLATION INSTRUCTIONS