Perfect Aire PNC18000 - Manual (Page 6)

NORMAL SOUNDS
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Sleep Check Filter Follow Me
Auto On/off Fan High Med
Low
Energy Saver
on off
Timer
Auto
Fan
Cool
Dry Mode
TEMP/TIMER
TEMP/TIMER
Heat
5
NOTE: All of the pictures in this manual are for explanatory purposes only. The actual shape/look of the
air conditioner purchased may be slightly different, but the operations and functions are similar.
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its functions.
Then, follow the symbol for the functions you desire. The unit can be controlled by the unit controls alone or with the
remote control.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
UNIT CONTROL
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn the unit on or off.
TO CHANGE TEMPERATURE SETTING:
Press
temperature setting.
UP/DOWN button to change the /
NOTE:Press or hold either UP( ) or DOWN ( ) button
until the desired temperature is seen on the display.
This temperature will be automatically maintained
O O O O anywhere between 62 F(17 C) and 86 F(30 C). If
you want the display to read the actual room
temperature, see “To Operate on Fan Only” section.
(Cooling Only Models)
(Electric Heater & Heat Pump Models)
TEMP/TIMER
Fan Mode
Sleep
Timer
Check
Filter
Energy
Saver
REMOTE SIGNAL
RECEPTOR
Follow
Me
Auto
High
Med
Low
On Off
Auto
Fan
Cool
Dry
TEMP/TIMER
TEMP/TIMER
Fan Mode
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Auto
High
Med
Low
On Off
Auto
Fan
Cool
Dry
TEMP/TIMER
Heat
NOTE: The unit will automatically initiate the
Energy Saver function under “Cool,” “Dry” and
“Auto” (only Auto-Cooling and Auto-Fan) modes.