Perfect Aire PACSO12000 - Manual (Page 7)

on off
Timer
Temp/Timer
On/off
Temp/Timer
Fan Speed
Check
Filter
Sleep
Auto
Low
Med
High
AIR CONDITIONER FEATURES(CONTINUED)
TO TURN UNIT ON:
NOTE: The following instructions represent the Unit Controls, the same instructions can be used
for the Remote Control.
TO CHANGE TEMPERATURE
SETTING:
Press the On/Off button.
DO THIS:
Press to raise
DO THIS:
Press to lower
Press or hold either Up( ) or Down ( ) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62 F(17 C) and
86 F(30 C). If you want the display to read
the actual room temperature, see To Operate
on Fan Only section.
NOTE:
TO ADJUST FAN SPEEDS:
Press to select
appropriate fan
speed
DO THIS:
NOTE:
6
on off
Timer
Temp/Timer
Energy
Saver
Temp/Timer
Auto
Cool
Dry
Fan
Mode
Heat
on off
Timer
Temp/Timer
On/off
Temp/Timer
Fan Speed
Check
Filter
Sleep
Auto
Low
Med
High
Used to select the Fan Speed in four steps-
Auto, Low, Med or High. Each time the button
is pressed, the fan speed mode is shifted.For
some models, the fan speed can not be adjusted
under HEAT mode. On Dry mode,the fan speed
is controlled at Low automatically.
S II