Perfect Aire PNC12000 - Manual (Page 7)

NOTE: The following instructions represent the Unit Controls, the same instructions can be used
for the Remote Control.
6
TO TURN UNIT ON:
TO CHANGE TEMPERATURE SETTING:
Press the
On/Off button.
DO THIS:
Press to raise
DO THIS:
Press to lower
Press or hold either Up ( ) or Down ( ) button
until the desired temperature is seen on the
display. This temperature will be automatically
maintained anywhere between 62ºF (17ºC) and
86ºF (30ºC). If you want the display to read
the actual room temperature, see “To Operate
on Fan Only” section.
NOTE: (UP/DOWN button)
TO ADJUST FAN SPEEDS:
Press “Fan” to
select fan speed
DO THIS:
NOTE: (FAN button)
There are four (4) fan speeds: “Auto,” “Low,”
“Med” or “High.” Each time the button is pressed,
the fan speed mode is shifted. On “Dry” mode
the fan speed is controlled at low automatically.
NOTE: The unit will automatically initiate the
Energy Saver function under “Cool,” “Dry” and
“Auto” (only Auto-Cooling and Auto-Fan) modes.
Low
Auto
Med
High
Auto
Cool
Dry
Fan
Fan Mode
On
Off
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Ion
Low
Auto
Med
High
TEMP/TIMER
Auto
Dry
Fan Mode
On
Off
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Ion
Low
Auto
Med
High
TEMP/TIMER
Auto
Cool
Dry
Fan
Fan Mode
On
Off
Sleep
Timer
Check
Filter
Energy
Saver
Follow
Me
Ion
AIR CONDITIONER FEATURES (CONTINUED)