Philips MC165C-37 - Manual (Page 9)

BASIC FUNCTIONS
Switching on
To switch the unit on, press STANDBY-ON on the unit.
To switch the unit to standby, press STANDBY-ON again
((!) on the remote control).
Demonstration mode
The demonstration mode displays various digital features
of the unit. It can be activated during standby.
Activating and deactivating the demonstration mode
1 Keep STANDBY-ON on the unit depressed for at least
5 seconds.
-♦ The demonstration mode is activated.
2 Press STANDBY-ON ((!) on the remote control).
The demonstration mode is deactivated.
Volume and sound adjustment
Adjust the volume by using VOLUME (VOLUME -/-r on the
remote control).
-►The volume level between i'UL i1IiJ and
I'uL rin;; is displayed.
Press DSC repeatedly to select a sound characteristic,
-►jnzz i/'.CLRSGIi: ^,РПР J oraPTinPL is
displayed.
Press DBB to switch the bass enhancement on and off.
-»вши is shown.
Press INCREDIBLE SURROUND (INC. SURR. on the remote
control) to switch the surround sound effect on and off.
is shown.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
1 Press MUTE on the remote control to interrupt the sound
reproduction instantly.
-♦ Playback will continue without sound.
2 Press MUTE on the remote control again to reactivate
the sound reproduction.
Using additional appliances
It is possible to use an additional appliance, e. g. tape
recorder with the unit. Refer to the instruction manual of
the appliance for connections and operations.
1 Insert the red plug of a cinch cable to the red socket
(AUX IN R) and the white one to the white socket
(AUX IN L).
2 Connect the other end of the cinch cable to the
additional appliance.
3 Press AUX to select the input for the appliance.
-►Run is displayed.
4 Operate your appliance as usual and adjust the volume
and sound at the unit.
Note: It is not possible to use a turntable with AUX IN.
Environmental information
All redundant packing material has been omitted. We
have done our utmost to make the packaging easily
separable into three mono materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags,
protective foam sheet).
Your unit consists of materials which can be recycled if
disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.
cz