Philips MC165C-37 - Manual (Page 13)

RADIO
Tuning to radio stations
1 Press TUNER.
-+ ¡¡HJIiD is shown.
2 Select a wave band by pressing BAND repeatedly.
-♦The selected waveband is shown.
3 Keep ◄◄ TUNING ►► (◄◄ or ►► on the remote control)
depressed for approximately 1 second.
-»GEITR l M is displayed and the radio tunes to a
station with sufficient strength.
4 Repeat searching until you find the desired station.
• To tune to a weak station briefly press ◄◄ TUNING ►►
or ►► on the remote control) as often as necessary
for optimum reception.
Programming radio stations
It is possible to store up to 30 radio stations. The unit can
select and program stations by itself or you can choose
them yourself.
Automatic programming
Using automatic programming will overwrite your former
presets.
• Keep PROGRAM on the unit depressed for more than 2
seconds.
RUTS is displayed and all available stations are
programmed.
Manual programming
1 Tune to a desired radio station (see "Tuning to radio
stations").
2 Press PROGRAM on the unit.
-♦ PROGRAM flashes.
3 Press ▼ PRESET A to assign a number from 1 to 30 to
this station.
4 Press PROGRAM on the unit to confirm the setting.
-»PROGRAM goes off, the preset number and the
frequency of the preset station are displayed.
Tuning to preset stations
• Press T PRESET A until the preset number of the
desired station is displayed.
Switching FM antenna sensitivity
If the signal of a FM transmitter is too strong or too weak,
it is possible to adjust the antenna sensitivity.
• Keep DSC depressed for more than 5 seconds.
-» Either lu CFIL orSIGTRNT is displayed.
• E2
"S)
1 3