Philips MC165C-37 - Manual (Page 11)

CD PLAYER
Playing a CD
This CD player can play all kinds of Audio Discs such as
CD-Recordables and CD-Rewritables. Do not try to play a
CD-ROM, CD-I, CDV or computer CD.
1 Press OPEN/CLOSE on the unit.
->H3 is shown and the tray is opened.
2 Insert an audio CD (printed side up) and close the tray by
pressing OPEN/CLOSE on the unit again.
-►RCnSING is displayed. Then, the CD player stops.
The total number of tracks and the total playing time
of the CD are displayed.
3 Press ►!! (PLAY ► on the remote control) to start
playback.
-♦The current track number and the elapsed playing
time are displayed.
4 Press ■ (STOP ■ on the remote control) to stop
playback.
-♦The total number of tracks and the total playing time
of the CD are displayed.
• You can interrupt playback by pressing ►!! (II on the
remote control).
-♦The time where playback was interrupted is flashing.
• Continue playback by pressing ►!! (PLAY ► on the
remote control).
Note: Playback will also stop if:
- you open the CD tray,
- the end of the CD is reached, or
- you select TUNED or AUX.
SHUFFLE and REPEAT
Repeating a track, the CD or the program
1 Press repeatedly REPEAT on the remote control during
playback to select either:
-♦ repeat : The current track is played repeatedly.
-♦REPEAT all : The entire CD (or program) is played
repeatedly.
2 Playback starts in the chosen mode.
3 To return to normal playback, press REPEAT on the
remote control until the display indication disappears.
Playing tracks in random order
1 Press SHUFFLE during playback.
-♦SHUFFLE is shown and all tracks of the CD (or
program) are played in random order.
2 To return to normal playback, press SHUFFLE again.
Note: It is possible to combine shuffle and repeat, e. g.
SHUFFLE REPEAT ALL.
Selecting a track and searching
Selecting a track during playback
• Briefly press or (PREV. !◄ or NEXT W on the
remote control) once or several times to skip to the
beginning of the current, previous or subsequent
track(s).
-♦ Playback continues with the selected track.
Selecting a track when playback is stopped
1 Briefly press or (PREV. N or NEXT ►! on the
remote control) once or several times.
2 Press ►!! (PLAY ► on the remote control) to start CD
play.
-♦ Playback starts with the selected track.
Searching for a passage during playback
1 Keep or depressed (◄◄ or ►► on the remote
control) to find a particular passage in a backward or
forward direction.
-♦ Playback continues at a low volume.
2 Release the button when you reach the desired passage.
-♦ Normal playback continues.
Note: During shuffle, while repeating a track or playing a
program, searching is only possible within the
particular track.
1 1