Cisco 8961 - Manual (Page 11)

E-11
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
Appendix E Installing the Wall Mount for the Cisco Unified IP Phone
Installing a Wall Mount for a Phone with a Key Expansion Module
Step 2
Attach the phone bracket to the IP Phone and key expansion assembly ( Figure E-9 ).
a.
Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
cords from the base of the phone.
b. Remove the label covers that are concealing the screw holes.
c.
Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The ports of the
phone should be accessible through the holes in the bracket.
d.
Secure the phone bracket to the IP Phone with the machine screws.
e. Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
clips incorporated into the phone body.
Figure E-9 Attaching the Phone Bracket
206770
Slot for
mounting tabs
Screw holes