Casio IT-2000 - Manual (Page 23)

23
4. Error Codes and Error Messages
Any termination codes and error information generated by the PC will be recorded in the error log
file on the PC.
This error log file will be created according to the file name specified by the DEVICE.INI file
(configuration file), and each new log entry will be appended to the file.
This error log file cannot be automatically deleted. Therefore, it is recommended to check the
contents when required and delete the file.
If an error occurs on the PC side, the corresponding error message will appear on the PC's display.
Since error messages are displayed for each I/O Box, a maximum of eight error messages can be
displayed at one time. If an error occurs on the IT-2000 side, the corresponding error message will
appear on the LCD of the IT-2000.
Error Code Session
No.
Date Time
Detail Category
Error Message
0 6- 9-1997 17-44-46 0 1 Undefined function code
0 6- 9-1997 18- 1-24 0 5 Communication error
0 8- 9-1997 11-53-29 4 5 Command timeout error
Table 4.1 Example error log file
For information about the error codes and error messages and their remedies, refer to Table 4.2
"Error Codes and Error Messages".
When confirming the contents of the error log file, use a commercial editor. No dedicated editor is
supplied by Casio.