Compaq DESKTOP CONNECTOR FOR ACMS AAPG9DKTE - Manual (Page 68)

9.1.2 Files and Logical Names Installed on Your System
The following files contain a list of the files added to your system by the
gateway installation:
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$FIRST_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_ADD_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_AVERTZ_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_COMMON_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SAMPLE_EMPLOYEE_FILES.DAT
SYS$COMMON:[SYSTEST.ACMSDI]ACMSDI$SYSTEM_FILES.DAT
You can display or print these files after you install the gateway software.
After the installation, if the gateway is started (by ACMSDI$STARTUP.COM),
the following logical names are added to your system:
ACMSDI$EXAMPLES
ACMSDI$EXAMPLES_ACMS
ACMSDI$EXAMPLES_ADD
ACMSDI$EXAMPLES_AVERTZ
ACMSDI$EXAMPLES_EMPLOYEE
ACMSDI_AVERTZ_DEFAULT
AVERTZ_TDB
These logical names are entered into the system logical name table. The names
are used in various gateway startup files. Thus, they are automatically entered
into the system logical name table whenever the gateway startup command file
is executed.
9.1.3 Installation Verification Procedure
The Installation Verification Procedure (IVP) for gateway software verifies the
installation. During the installation, you are asked whether you want to run
the IVP as part of the installation. If you answer YES, VMSINSTAL runs the
IVP. It is recommended that you run the IVP to be sure that the software is
installed correctly.
After you install the gateway software, you can run the IVP independently to
verify that the software is available on your system. You might also want to
run the IVP after a system failure to be sure that users can access gateway
software. See Chapter 11 for information about running the IVP separately
from the installation procedure.
9–2 Installing TP Desktop Connector Gateway for ACMS Software