Casio XJ-S35 - Manual (Page 65)

65
This section explains how to configure advanced settings for a wireless LAN connection
between the Data Projector and a computer.
z All of the operations in this section assume that you have already configured the settings
under “Wireless LAN Connection Basics” (page 52).
z For details about projection operations after establishing a connection, see “Using Wireless
LAN for Projection” (page 91).
Web Setup
In order to modify the settings of a Data Projector manual setup profile and to configure
advanced settings of other Data Projector settings, you need first to display a special web
browser page named “Web Setup” on you computer screen. To display Web Setup, use a
web browser running on a computer that is connected to the Data Projector over a
wireless LAN.
To display and log into the Web Setup page
1 Use the Simple Connection profile to establish a wireless LAN connection
between a computer and the Data Projector.
z See “Establishing a Wireless LAN Connection with a Single Computer Using a Simple
Connection” on page 53 for more information.
z If a Simple Connection is already established between the first computer and the Data
Projector, proceed to step 2.
2 On the Wireless Connection window of the computer, click the button.
z This will start up the computer’s default browser and display an initial page like the one
shown below.
z The Web Setup page may not appear if your browser is running already. In this case,
quit the browser and then click the button again.
Advanced Wireless LAN Connection Settings