Casio XJ-S35 - Manual (Page 60)

60
13 Check the message that appears on the computer screen.
z When the computer finds the Data Projector, the display will change to a dialog box like
the one shown below for selecting the connected device.
14 Move the highlighting to the XJ-S35 Data Projector to which you want to
connect and then click the [OK] button.
z The computer will connect with the Data Projector and the above dialog box will close.
Confirm that the “Connection Profile” setting for the connected device information on the
Wireless Connection window shows “Manual Connection 1 (Test)”.
If there are other XJ-S35 Data Projectors with
wireless adapters connected in the area, all
of them that are detected will appear in the
list.
Projection area position buttons
(Used in step 18).