Canon VB-C10R - Manual (Page 60)

4-8
Panorama Creation Tool
1 Display Connect Information
Displays the VB-C10/VB-C10R’s connection
information in a dialog box.
2 Reload Camera Information button
Recaptures camera information and
panorama information. If VB-C10/VB-C10R
settings were changed after this tool was
started up, this button can be used to get
the latest information.
3 Update Panorama Image button
Sends panorama pictures to the VB-C10/
VB-C10R and reloads them.
4 Captured date display
The date the panorama picture was
captured, if one was recorded, are
displayed here.
About the Panorama Creation Tool Display Screen
An overview of the functions of the GUI that is displayed after the Panorama Creation Tool starts
up is described below.
1
2 3
4
5
9 8 7 6
5 Panorama picture display
Shows the panorama picture that was
captured.
6 Capture button
Captures panorama pictures.
7 Remove image button
Deletes panorama pictures.
8 Position of AE Lock switching
Switches AE lock position between
“Center” and “Current position”. The AE
Lock function captures pictures based on
the brightness of the selected position.
9 Backlight adjust switching
This function adjusts backlight. When
switched on, it is effective on images that
are dark due to backlight.