Casio EX-S100 - Manual (Page 51)

BASIC IMAGE RECORDING
51
• This causes an image or a message to appear on
the monitor screen, and then enters the currently
selected recording mode.
• If the camera is in the PLAY mode when it turns on,
the message “There are no files” will appear if you do
not have any images stored in memory yet. In
addition, the
icon will be visible at the top of the
display. If this happens, press [ ] (REC) to enter
the currently selected recording mode.
2. Change the “ REC
Mode” setting to “
Snapshot” .
• The (Snapshot
mode) icon is displayed
on the monitor screen
while the Snapshot
mode is selected.
• You can also use the
key customization
feature to assign the
mode change operation
to the cursor keys, so
the “REC Mode” setting
is changed whenever
you press the [
̇
] or [
̈
]
key (page 103).
1200 1200 1600 1600
NORMAL NORMAL
10 10
04/ 04/12 12/24 24
12 12:58 58
IN
Focus frame
Snapshot mode icon
3. Compose the image on the monitor screen so
the main subject is within the focus frame.
• The focusing range of the camera depends on focus
mode you are using (page 67).
4. Press the shutter button half
way to focus the image.
• When you press the shutter
button half way, the camera’s
Auto Focus feature automatically
focuses the image, and displays
the shutter speed and aperture
values.
• You can tell whether the
image is focused by
observing the focus frame
and the operation lamp.
Operation lamp
Shutter button